iPhone 16 Pro Motherboard Repair in Al Khobar

iPhone 16 Pro Motherboard Repair in Al Khobar fixes a phone that won't start or keeps rebooting. We check the board free and trace the faulty part under a microscope. Then we replace that one part, not the whole board, and we keep your data wherever we can.

An iPhone 16 Pro not turning on is the most common sign. The screen stays black on the charger, and the buttons do nothing. Other phones reboot every few minutes, lose their signal or get hot while they seem dead.

Most people try a force restart and a long charge before coming in. When nothing changes, the fault is often on the board. But a dead battery or a loose screen cable can look exactly the same.

It's better not to wait. A short on the board keeps heating the parts around it, even when the phone looks off. Water or liquid inside keeps eating the board, so a small fault grows each day.

We test the simple parts first, so you only pay for board work you need. The iPhone 16 Pro motherboard is two thin layers stacked together, packed with tiny parts. Often just one part has failed, and we replace only that.

How Kabayan Center Repairs an iPhone 16 Pro Motherboard

We fix these board faults on this phone.

• No power at all, even on a good charger
• Rebooting again and again, or stuck on the logo
• No service, or a phone that keeps losing its network
• No charging, even with a good port and battery
• Heat near the cameras while the phone is off
• Faults that start after a spill, a drop or an earlier repair

Here is how an iPhone 16 Pro motherboard repair works with us, step by step.

1. We check the phone free and test the battery, screen and port to rule them out.
2. We connect a power meter that shows how much power the board pulls.
3. We tell you what we found, and you decide before any work starts.
4. We open the phone, disconnect the battery and lift the board out.
5. We trace the fault under a microscope, using the meter and a heat camera.
6. We replace the faulty part, or repair a broken line, with fine soldering tools.
7. We rebuild the phone and test power, charging, signal and cameras before you check it.

Have a laptop or tablet that won't start? Our motherboard repair service covers other devices too. Customers come to our shop on King Fahd Road from Dammam and Dhahran as well.

Why an iPhone 16 Pro Board Fails: 3 Real Cases

Gaming under a blanket while charging

This one starts late at night. A university student played games in bed for hours, with the phone charging under a thick blanket. The phone grew hot, and one night it switched off and stayed off.

"It was burning hot, and then just black," the student said. They had searched for iPhone Motherboard Repair in Al Khobar the next day. Heavy games and charging both make heat, and a blanket keeps it all in.

The power meter showed a short on the board. With the heat camera, one small power part lit up bright. The iPhone 16 Pro motherboard repair used a hot-air tool, and the phone started with all its data.

Our battery test showed more damage from the same heat. The battery health had dropped sharply, and the cells looked slightly puffed. So we also did a phone battery replacement before closing the phone.

The phone now runs cool during games. We suggested playing at a desk, unplugged, and taking breaks so the phone can cool.

Never charge a phone under a blanket or a pillow. Trapped heat harms the board and the battery together.

Perfume leaked inside a handbag

A customer came to us with a phone that smelled strongly of perfume. A bottle had cracked inside a handbag, and the phone sat in the pool of it for hours. It worked at first, then went dead the next evening.

"It smells lovely, but it won't turn on," the owner said, half laughing. The owner had looked up mobile repair in Al Khobar on a friend's phone.

Perfume holds alcohol and oils. The alcohol helps it creep under seals, and the oils leave a sticky film on the board.

We found that film across the lower part of the board, with early corrosion around it. We did a water damage repair, cleaning the board in a special bath. The phone started again with all its photos and chats.

But wireless charging no longer worked, because the liquid had reached its parts. The owner chose to charge by cable only for now. So the phone is back in daily use, with one feature missing.

A sealed pouch for perfume in a handbag would have prevented it. So would a quick visit on the first day.

A screw in the wrong hole after an earlier repair

We often see this after a rushed repair somewhere else. A security officer had a new screen fitted at a small stall. Soon after, the phone started rebooting and lost its signal now and then.

"The screen is fine, but everything else went wrong," the officer said. The officer had already tried a reset, with no change. Inside, we found one long screw placed where a short one belongs.

A long screw in the wrong spot can push through into the board below. It breaks the tiny lines that carry power and signals. The phone may work for a while, then fail as the damage settles.

Under the microscope, we found fine lines cut by the screw tip, right under the hole. We repaired them with very fine wire and sealed the area. Then we put every screw back in its proper hole.

After the iPhone 16 Pro motherboard repair, the phone stopped rebooting and the signal stayed strong. All the data was still there, and nothing had to be wiped.

We showed the officer the damaged spot under the microscope. A careful repair always keeps the screws in order, because each hole takes one size.

How to Keep Your iPhone 16 Pro Board Safe

• Never charge or game with the phone under a blanket or pillow.
• Keep perfume, oils and drinks away from the phone in bags.
• Bring the phone in the same day after any spill, even if it still works.
• Choose careful repairs, since a wrong screw can force an iPhone 16 Pro motherboard repair.
• Back up your photos and chats every week.
• Get phone repair in Al Khobar as soon as the phone reboots by itself or runs hot while off.

Related services

• Data recovery for photos and files on a phone that won't start
• Charging port repair for a USB-C cable that is loose or only charges at an angle