iPhone 6S Charging Port Repair in Al Khobar

iPhone 6S Charging Port Repair in Al Khobar fixes a phone that charges loosely, slowly or not at all. We clean the Lightning port or fit a new port part, which also holds the headphone jack and mic. We test all three after a free check, and most jobs are done the same day.

An iPhone 6S not charging can look like a dead battery. The charging sign flickers on and off, the cable falls out, or nothing happens at all. Some owners also notice that callers can't hear them well, because the mic sits on the same part.

Many people buy a new cable first, and some try a new charger too. When the new ones do the same thing, the problem is inside the phone. Not every fault needs a new part, though.

It's better not to wait. A loose plug heats the pins and slowly burns them. The battery also runs flat again and again, which wears it out long before its time.

Most ports are just packed with dust, sand or lint, and careful cleaning fixes them. Bent, burnt or rusted pins are different. For those, we replace the iPhone 6S charging port part, along with its jack and mic.

How Kabayan Center Repairs an iPhone 6S Charging Port

These are the charging faults we fix most on this phone.

• A cable that wobbles or only charges at one angle
• No charging, or charging that stops and starts
• Slow charging, even with a good charger
• A message that the accessory is not supported
• Crackling or silence from wired earphones
• Callers who can't hear you clearly

Here is how the iPhone 6S charging port repair works, step by step:

1. We look into the port under a bright light and test it with our own cable.
2. We tell you what it needs, and you decide before any work starts.
3. We clean out dirt with fine plastic tools, never with metal pins.
4. If the pins are damaged, we open the screen from the bottom and unplug the battery.
5. We take out the loudspeaker and the vibration motor that sit over the port part.
6. We fit the new port part and test charging, the headphone jack and the bottom mic.
7. We close the phone and let you check it yourself.

Using a different phone? Our charging port repair service covers other models too. Customers come to our shop on King Fahd Road from Dammam and Dhahran as well.

Why an iPhone 6S Stops Charging: 3 Real Cases

Sand from a windy day at Half Moon Bay

We often see this after a weekend at the beach. A family spent a windy day at Half Moon Bay, and the phone lived in a beach bag. By evening, the cable felt gritty going in.

"It scratches when I plug it in," the owner said. They had searched for iPhone Charging Port Repair in Al Khobar the next morning. Fine sand packs into a port fast, and each plug pushes it deeper.

Under our light, the port held a layer of pale sand at the bottom. The pins were dull but not bent. We picked the sand out slowly with plastic tools and a soft brush.

The cable clicked in firmly after the iPhone 6S charging port repair. The phone charged at normal speed on the first try. No new part was needed.

We also cleared sand out of the headphone jack, since it sits right beside the port. Wired earphones played clearly again, with no crackle.

The owner now keeps the phone in a zipped pouch on beach days. A pouch keeps the sand out, even on the windiest afternoon. Sand never gets the chance to settle.

A car charger that left the cable hanging

A delivery driver came to us with a phone that charged only when the cable was held up. The car charger sat low, so the cable always pulled down on the port. Months of that had loosened the part inside.

The driver had looked up mobile repair in Al Khobar between drops. "Callers keep saying I sound far away," the driver added. That clue mattered, because the bottom mic sits on the same part as the port.

We opened the phone and found the port cable torn near its joint. Cleaning could never fix that. We fitted a new port part, and both charging and the mic came back.

While testing, the battery health showed low. Months of charging that stopped and started had worn it down. The driver chose a phone battery replacement in the same visit.

We suggested a car charger that sits higher, or a short cable that doesn't hang. The phone now charges firmly on every drive.

Calls sound close and clear again, even with the AC fan on high. The driver no longer has to repeat every address.

Sweat in a shirt pocket all summer

This one starts in a garden. A gardener worked outside through the hot months with the phone in a shirt pocket. Sweat soaked into that pocket every afternoon.

The phone began charging only now and then, and then not at all. The iPhone 6S has no water rating, so sweat slowly reached the inside. Salty sweat turns into green crust on metal pins.

We found green crust on the port pins and white marks on the board beside it. So we did a water damage repair, cleaning the board before the iPhone 6S charging port repair. Charging came back, and the mic worked again.

But charging stayed slower than normal. The sweat had weakened a small part on the board that controls charging. We explained that a motherboard repair could fix that later.

The gardener chose to keep using it for now, since it still charges fully overnight. So the phone works, but not at full speed yet.

It now rides in a sealed plastic pouch on hot days. That keeps the sweat away from the new port. The board work is planned for the cooler months.

How to Keep Your iPhone 6S Charging Port Working

• Check the port with a torch now and then, and bring it in if you see dirt.
• Never clean it with a metal pin, a needle or a toothpick.
• Pull the cable out by the plug, never by the wire.
• Keep the phone in a pouch at the beach and on sweaty workdays.
• Use a car charger that doesn't leave the cable hanging.
• Get phone repair in Al Khobar as soon as charging needs a special angle.

Related services

• Phone screen replacement for a cracked or dark screen