iPhone SE (2nd generation) Motherboard Repair in Al Khobar

iPhone SE (2nd generation) Motherboard Repair in Al Khobar fixes a phone that won't power on or keeps restarting. We check the board free, then find and replace the faulty part under a microscope. We save your data wherever we can, and we never replace the whole board when one small part will do.

This phone is also called the iPhone SE 2020. An iPhone SE 2020 not turning on is the sign we see most. The screen stays black on the charger, and the Home button does nothing at all.

Other board faults are less clear. The phone may restart on the logo, lose its signal, or show a black screen while it still rings. Some run warm even when they're switched off, or drain the battery overnight.

It's better not to wait. A short keeps heating the parts near it, and water left inside keeps spreading rust. A small fault today can become one that can't be fixed.

Not every dead phone has a board fault, so we test the battery, screen and port first. The iPhone SE 2020 motherboard is small and packed with tiny parts. Often only one of them has failed, and we replace just that part.

How Kabayan Center Repairs an iPhone SE (2nd generation) Motherboard

These are the board faults we fix on this phone.

• No power, even on a good charger
• A logo that loops without reaching the lock screen
• A black screen with sound, after a screen repair or a fall
• No signal or no Wi-Fi
• No charging, even with a good port and battery
• Faults that start days after water

Here is how our iPhone SE (2nd generation) motherboard repair works, step by step.

1. We check the phone free with a known good battery, screen and cable.
2. We connect a power meter to see how much current the board draws.
3. We explain what we found, and you decide before any work starts.
4. We open the screen from the front, keep the Home button cable safe and disconnect the battery.
5. We take out the board and trace the fault under a microscope.
6. We replace the failed part with a hot-air tool and a fine soldering tip.
7. We rebuild the phone and test power, charging, signal, Touch ID and the cameras.

Got another phone or a laptop with a board fault? Our motherboard repair service covers those too. Customers come to our shop on King Fahd Road from Dammam and Dhahran as well.

Why an iPhone SE (2nd generation) Board Fails: 3 Real Cases

Squeezed under weights in a gym bag

A customer came to us after a workout. The phone had travelled in a gym bag, under a pair of heavy weights. From then on, it looped on the logo and never reached the lock screen.

"There's not one scratch on it," they said. They had searched for iPhone Motherboard Repair in Al Khobar, sure it was a software fault.

Heavy weight bends a phone, even if the glass survives. The tiny solder joints under the main chips can crack. Then the phone starts, loses contact and starts again in a loop.

Under the microscope, we found cracked joints under the chip that stores the data. We reworked them, and the phone reached the lock screen, but it froze within minutes.

So we saved the photos and contacts first. We moved them off through our data recovery service while the phone stayed on.

This iPhone SE (2nd generation) motherboard repair could not make the board stable for daily use. The customer moved everything to another phone, with nothing lost.

Now the phone rides in a side pocket of the bag. Weights and phones never share a space anymore.

Dropped in a bucket while mopping

This one starts on a cleaning shift. A cleaner had the phone in a top pocket and leaned over a bucket of soapy water. It slipped straight in.

The phone was out in seconds and still on, so it went back in the pocket. That night, it died and never came back on the charger. Rice and a warm windowsill did nothing to help.

The cleaner had looked up mobile repair in Al Khobar on a co-worker's phone. Soapy water leaves soap and minerals on the board. Those turn into rust under the chips, quickly once power is on.

We found white crust and green spots around one power area. We did a water damage repair, cleaning the board in a special bath first. The rust was still light, because the phone came in quickly.

Then we replaced a rusted power part in the iPhone SE (2nd generation) motherboard repair, and the phone started. Touch ID, charging and calls all worked again.

The cleaner now keeps the phone in a zip pocket on shift. "I'll switch it off straight away next time," the cleaner said. That's the right move with any wet phone.

A black screen after a low-cost screen fitting

We often see this after a screen swap with a poor part. A tailor had a low-cost screen fitted at a stall. A week later, the screen went black, though the phone still rang.

"I can hear messages, but I can't see anything," the tailor said. Another new screen, from the same stall, stayed black too. The stall said the board must be faulty.

A poor screen can short the circuit that powers the screen's backlight. The short burns a tiny part on the board. After that, no screen will light up, however new it is.

Under the microscope, a tiny filter part beside the screen socket was burnt. We replaced it in the iPhone SE (2nd generation) motherboard repair and fitted a good screen. The picture lit up bright and clear.

During the test, the battery also showed low health. So we did a phone battery replacement while the phone was open. Its old cells had been worked hard for a long time.

The phone now has a bright screen and a full day of charge. Touch ID still worked, because the stall had moved the original Home button.

How to Keep Your iPhone SE (2nd generation) Board Safe

• Keep the phone away from weights and heavy tools in any bag.
• Switch a wet phone off at once and bring it in. Don't charge it.
• Use a good screen for any repair, because a poor one can burn the board.
• Use a case with thick corners to soften drops.
• Back up your photos and chats every week.
• Get phone repair in Al Khobar as soon as the phone restarts by itself or runs hot while off.

Related services

• Charging port repair for a cable that is loose or charges only at an angle