Samsung Galaxy S9+ Motherboard Repair in Al Khobar

Samsung Galaxy S9+ Motherboard Repair in Al Khobar finds and fixes the fault behind a dead or restarting phone. We test the board free and trace the problem to one part. Then we fix or replace that part, and save your files first when we can.

A Samsung S9 Plus not turning on is the most common reason people bring it in. Others restart again and again on the logo screen, or get hot with nothing open. Some lose signal, sound or charging after a fall.

It's worth acting early. A small short on the board can heat up and damage the parts around it. A phone that gets hot while switched off should be unplugged at once.

Not every dead phone has a bad board. A flat battery, a broken charging port or a stuck update can look exactly the same. We rule those out first, so you only fix what is really broken.

When the Samsung S9 Plus motherboard is at fault, it's usually one small part. A power chip, a tiny filter or a cracked joint can stop the whole phone. We find it with a microscope and a power meter, then replace it or fix its joints.

How Kabayan Center Repairs a Samsung Galaxy S9+ Motherboard

We fix these board faults on this model.

• A phone that shows no sign of life, even on the charger
• Restarts that loop on the logo screen
• A phone that gets hot while doing nothing
• No signal, no Wi-Fi or no sound after a fall
• Charging that fails even with a good port and battery
• Board damage from water, sweat or rain

This is how we work on the board, step by step:

1. We test the phone free with a battery and charger we know are good.
2. We tell you what we suspect, and you decide before we go further.
3. We open the phone, unplug the battery and take the board out of the frame.
4. We feed the board power from our test supply and find the part that gets hot.
5. We check that part under a microscope, then replace it or repair its joints.
6. If the phone starts, we back up your photos and chats before more tests.
7. We rebuild the phone, reseal it and test calls, charging and cameras with you.

Laptop or another phone? Our motherboard repair page covers those boards too. People bring phones to our shop on King Fahd Road from Dammam and Dhahran as well.

Why a Galaxy S9 Plus Board Fails: 3 Real Cases

Charged from a damaged cable in a laptop

A customer came to us after charging the phone from a laptop at work. The cable had a torn sleeve near the plug, with bare wire showing. One afternoon there was a small spark, and the phone went black.

"It won't even vibrate now," the office worker said. They had tried every charger at home, and nothing woke it. Even holding the power button did nothing.

The worker had searched for Samsung Motherboard Repair in Al Khobar the same night. On our test supply, the board drew power at once and one small chip got hot. The spark had burnt a part that protects the charging line.

We replaced that part under the microscope, and the phone started again. The port showed a dark scorch mark, so we did a charging port repair as well. A damaged port could have burnt the new part again.

The phone works normally now, and the torn cable went in the bin. We explained that a new cable is far easier to replace than a board. The worker now checks every cable before plugging it in, and keeps a spare at the desk.

A fall from a balcony cracked the board

One morning a phone came in with a bent frame and a shattered back. It had slipped from a balcony rail during a video call and fallen to the street below. The owner, a hotel worker, just wanted the photos back.

"My family pictures are all on it," the worker said. A hard fall from height can bend the board and crack the tiny joints under the chips. This phone showed no power at all, not even on the charger.

Under the microscope, we found a cracked chip near the bent corner of the board. The damage ran too deep, and the board was beyond repair. So we turned our focus to the files instead.

Our data recovery work brought the phone up just long enough to copy the photos and chats. We moved them to a new phone the worker brought in. The worker could scroll through every family picture before leaving the shop.

The old phone could not be saved, but the family pictures were. We helped turn on a cloud backup, so a fall never puts them at risk again.

Rain on a motorcycle during deliveries

We often see this in the rainy weeks of winter. A delivery rider kept the phone in a handlebar mount for maps. A sudden storm soaked it for a whole shift, and the rider kept riding to finish the orders.

At first it worked, then it started restarting and got hot at every traffic light. "It dies every few minutes," the rider said. The rider had asked about mobile repair in Al Khobar at a fuel station.

Rain had got in through a gap in the old seal around the back glass. Inside, we found white crust around the battery connector and a burnt part beside it. We did a water damage repair, cleaning the board and replacing that part.

The battery had also run hot through all those restarts. We tested it, and it still held a good charge, so it stayed in. We fitted a fresh seal on the back before closing up.

The phone runs through a full shift again. The rider now uses a waterproof pouch on the mount and keeps a spare charger in the bag. On rainy days, the phone goes inside the jacket between stops.

How to Keep Your Galaxy S9+ Board Safe

• Throw away cables with torn sleeves or bent plugs.
• Use a waterproof pouch on bike and motorcycle mounts.
• Keep the phone off balcony rails, car roofs and high ledges.
• Don't charge a phone that got wet until it has been checked.
• Turn on a cloud backup for your photos and chats.
• Unplug the phone if it gets hot while switched off.
• Book phone repair in Al Khobar when it restarts again and again, before the fault spreads.

Related services

• Phone battery replacement for a phone that runs hot and drains fast